Palm Vein Recognition Terminal
Palm Vein Recognition Terminal
LSP980

Palm vein recognition is safer and more convenient

Compatible with palm recognition, card swiping, and QR code scanning

Qualcomm Snapdragon octa-core processor, low power consumption, high performance

Supports Ethernet, Wi-Fi, and full-network 4G

Can easily recognize twins

Not affected by makeup, glasses, etc.

Capacitive touch screen, multi-point touch G+G

Passed 3C, SRRC, CTA certification

Product Advantages

Technical Parameters


Dimensions (L × W × H)290mm×260mm×105mm
Power Input and Interface12VDC/ 3A 5521 DC socket
Rated Power18W, Maximum not exceeding 36W
Working EnvironmentMaximum Temperature: -10°C to +50°C, Humidity: 10% to 90%
Recommended Temperature: -10°C to +40°C, Humidity: 10% to 80%
Dual-screen DisplayOperation Screen: 10-inch IPS LCD, Resolution: 800×1280
Customer Display Screen: 5-inch IPS LCD, Resolution: 480×854
Touch ScreenCapacitive touch screen, multi-point touch G+G
CPU and Main Frequency8-core 1.8GHz A53, Qualcomm Snapdragon 450 processor
Memory2G LPDDR3 RAM
FLASH16GB eMMC
Operating SystemAndroid 7.1.2
Audio Output1. Number of speakers: 1;
2. Rated power per channel: 2W @5V/4R/1KHz;
3. Frequency response: 680Hz~~20KHz;
4. Signal-to-noise ratio: 86dB@5V/THD=1%/1KHz;
SPL: 99dB@2KHz/2W
RTC Clock BatteryYes, time保持 after power failure, battery life>2 years
Wired Network and InterfaceCommunication Protocol: 10/100Mbps Base-T Auto-adaptive; RJ45
WIFI1. Communication Band: 2.4G/5G dual;
2. Communication Protocol: 802.11a/b/g/n/ac;
3. Reception Sensitivity and Transmission Power:
802.11a TRP≥7 dbm TIS≤-65dbm
802.11b TRP≥10 dbm TIS≤-78dbm
802.11g TRP≥10 dbm TIS≤-67dbm
802.11n TRP≥7 dbm TIS≤-62dbm (5G/2.4G)
802.11ac TRP≥3 dbm TIS≤-62dbm
BluetoothBT4.2(BR/EDR+BLE)
Cellular Network1. Communication Band:
LTE-FDD: B1/B3/B5/B8
LTE-TDD: B38/B39/B40/B41
2. Reception Sensitivity and Transmission Power:
Each band meets: TRP≥15dbm TIS≤-87dbm
Some bands reach: TRP≥19dbm TIS≤-91dbm
Palm Recognition Module (Supports QR Code Scanning)1. Palm recognition distance: 5~12cm
2. QR code recognition distance: 3~20cm
3. Camera resolution: RGB 720×1024@25fps, IR 1720×1024@25fps
4. Communication interface: TYPEC (USB2.0 protocol);
Power supply: 5V 2A
Non-contact Card Reading1. Reading distance 3~5cm;
2. Read/write time <0.5 seconds;
3. Working frequency 13.56MHz±7KHz;
4. UART data transmission rate: 9600~230400bit/s;
Communication Protocol ISO/IEC 14443A/B, ISO15693
Scanning PortRecognition Distance: 30~150mm
Supported Formats:
2D Code Standards: QR Code, PDF417, DataMatrix (ECC200), etc.;
1D Code Standards: EAN13, EAN8, UPC-A, UPC-E0, UPC-E1, Code128, Code39, Code93, CodaBar, Interleaved 2 of 5, Industrial 25, Matrix 2 of 5, Code11, MSI Plessey, RSS-14, Limited RSS, Extended RSS, etc.;
USB Interface1. Number of interfaces: 2;
2. Interface type: USB 2.0, type-A interface;
3. Output voltage per channel: 4.8V~5.2V;
Output current per channel: 500~600mA
RJ12 Interface1. Communication method: RS232
2. Interface: RJ12 (compatible with RJ11)
SIM Card InterfaceMicroSIM card/1.8V2.95V auto-adaptive
Appearance ColorColor: Black/Orange; Material: Glass, PC+ABS plastic